Honeywell GES 用户手册
DN-6872 • 12/19/02 — Page 1 of 3
GENERAL
The Gentex Commander² GE Series features low-profile
strobes, horns or horn/strobe combinations that offer de-
pendable audible and audible/visual alarms and the low-
est current available.
strobes, horns or horn/strobe combinations that offer de-
pendable audible and audible/visual alarms and the low-
est current available.
Commander² GE Series horns allow selection of high or
low dBA, of synchronizable chime or whoop tones, as well
as selection of a 2400 Hz (remote signaling) or a low-fre-
quency broadband 1500-3000 Hz mechanical sounding
(evacuation) tone where doors must be considered.
low dBA, of synchronizable chime or whoop tones, as well
as selection of a 2400 Hz (remote signaling) or a low-fre-
quency broadband 1500-3000 Hz mechanical sounding
(evacuation) tone where doors must be considered.
Commander² GE Series models are easily field-change-
able from temporal 3 to continuous tone by simply remov-
ing a jumper. GEC models are shipped from the factory on
the temporal lower-frequency mode and come standard with
a rugged cast-metal mounting plate.
able from temporal 3 to continuous tone by simply remov-
ing a jumper. GEC models are shipped from the factory on
the temporal lower-frequency mode and come standard with
a rugged cast-metal mounting plate.
The Commander² GE Series appliances have a minimal
operation current and a minimum flash rate of 1 Hz regard-
less of input voltage. The Super Slide™ feature tests su-
pervision. A locking mechanism is included, which secures
the product to the bracket without screws showing.
operation current and a minimum flash rate of 1 Hz regard-
less of input voltage. The Super Slide™ feature tests su-
pervision. A locking mechanism is included, which secures
the product to the bracket without screws showing.
Commander² GE Series appliances are UL-
Listed for use with fire protective systems
per UL 464, UL 1971, and UL 1638. The
appliances are warranted for three years
from the date of purchase.
Listed for use with fire protective systems
per UL 464, UL 1971, and UL 1638. The
appliances are warranted for three years
from the date of purchase.
FEATURES
• Installers can prewire the entire system,
then install the signaling devices.
• Super Slide™ feature for easier supervi-
sion testing. When mounting Super
Slide™, die-cast metal mounting plate
mounts to single-gang boxes, double-
gang boxes, 4" (101.6 mm) square boxes,
or Gentex GSB box.
Slide™, die-cast metal mounting plate
mounts to single-gang boxes, double-
gang boxes, 4" (101.6 mm) square boxes,
or Gentex GSB box.
• Lower installation and operating costs.
• Input terminals utilize 12 AWG (3.25 mm²) to 18 AWG
(0.75 mm²).
• True evacuation tone. Switch selection for:
–
High or low dBA.
–
High or low frequency (1500 to 3000 Hz).
–
Temporal 3 signaling, chime or whoop tones.
• Tamperproof reentrant grille.
• Rugged die-cast metal mounting bracket. Surface-mount
with Gentex GSB box.
• Separate horn and strobe functions. Horn can be silenced
while strobes remain flashing.
S3406
(GEC, GEH models)
S5405
(GES models)
7135-0569:122
(GEC, GEH models)
7125-0569:123
(GES models)
California
State Fire
Marshal
Gentex Commander² GE Series
Low-Frequency Evacuation Signals
GEC, GEH, GES Models
December 19, 2002
Section: Audio/Visual Devices
DN-6872 • J-114B
Approved
MEA
285-91-E Vol. XV
ADA
City of
Chicago
• Synchronize strobe and/or horn with Gentex AVS44 con-
trol module.
• Widest range of candela available. 15/75, 75 and 110
candela strobes meets or exceeds ADA 4.28.3 require-
ments.
ments.
• Wide voltage range of 16 – 33 VDC or FWR.
• Dimensions: 5" (127 mm) high x 4.5" (114.3 mm) wide x
2.5" (63.5 mm) deep.
• Models available in red or off-white.
Super Slide™ is a trademark of Gentex Corporation.
6872pho1.jpg
This document is not intended to be used for installation purposes. We try to keep our
product information up-to-date and accurate. We cannot cover all specific applications or
anticipate all requirements. All specifications are subject to change without notice.
For more information, contact NOTIFIER. Phone: (203) 484-7161 FAX: (203) 484-7118
product information up-to-date and accurate. We cannot cover all specific applications or
anticipate all requirements. All specifications are subject to change without notice.
For more information, contact NOTIFIER. Phone: (203) 484-7161 FAX: (203) 484-7118
12 Clintonville Road, Northford, Connecticut 06472
NOTIFIER® is a
company.