Lorex Technology SG6352 用户手册

1. Attach the stand base to the wall or ceiling where you want to install the

camera. Locate a wall stud or ceiling, and secure the bracket using the
three supplied screws.

2. Secure the camera to the bracket by sliding the camera socket over the stand, and 

fasten it in place with the supplied screw.

3. Connect the supplied 9V DC adapter to the DC IN jack at the rear

of the camera, and plug it into an electrical outlet. Make sure the adapter connected    

to the camera is labeled camera.  You can turn the camera ON/OFF by holding the 
Channel for 3 seconds.

5

To 9V Power 
Adapter

Camera mounted

Wall

OPTION #1 – Permanent Wall Mount

OPTION #2 – Temporary Mounting

1. Connect the clip-on stand 

onto any object.