Jasco 45246 用户手册

6

•  Avoid positioning the camera so that it is viewing 

areas where half of the area is in bright sunlight 

and the other half is dark, such as the shadow 

of a building. All types of cameras have difficulty 

“seeing” into areas of such divergent light levels.

•  In low light conditions, the camera will 

automatically activate its high-powered Infrared 

(IR) LED’s and switch the camera to Long Range 

Night Vision mode. Long Range Night Vision 

viewing distance can be up to 60ft, and will be 

viewed in B/W.

•  The included AC adapters must be positioned 

no farther than 8’ from an AC outlet. Do not use 

either supplied adapter outside. If you need to 

extend an AC adapter cable, 12 ft. extensions 

are available by contacting Technical Support at 

800-654-8483.  

•  The Camera has an unobstructed wireless 

transmission range up to 200 ft. from the 

receiver. Transmission distance indoors is 

reduced due to interior walls, wiring, household 

fixtures and metal plumbing.   

The receiver system can monitor up to 2 wireless 

cameras. You can operate the receiver in either 

Manual or Auto mode. To view more than one 

camera, locate the camera channel selection 

switch (1  2  1/2) on the rear panel of the  

receiver.

The receiver must be set to the ‘1/2’ position to 

allow two cameras to be monitored. The next step 

will be to set the channel selection switch on both 

cameras. 

Operating the receiver in 

manual mode allows you  

to manually select a single  

camera/channel to monitor  

exclusively. The system will  

remain on the selected  

channel indefinitely until the  

other channel is selected. To select one of the two 

channels (cameras) manually, locate the AUTO 

and MANUAL buttons on the top of the receiver. 

Press and release the MANUAL button. The red LED 

labeled  ‘A — M’ will turn on and the corresponding 

Auto

Manual

Channel 

Selection 

switch