Directed Electronics AM5 用户手册

21

© 2008 Directed Electronics  All rights reserved

■ To arm the system, press the 

button on your transmitter. When the

system arms, your will hear a short horn honk, see the parking lights
flash once, and the doors will lock.

■ To disarm the system, press the 

button on your transmitter. You will

hear two short horn honks, the parking lights flash twice, and the doors
unlock.

■ Turn on the ignition. Press the integrated LED/Valet button the pro-

grammed number of times within 10 seconds. The system should now
disarm. If it does not, you may have waited too long. Turn the ignition
off and on and try again.

■ Turn ignition to “run” position, then turn to “off” position. Press and

release the integrated LED/Valet button within 10 seconds. The status
LED will light solid if you are entering Valet Mode, and it will go out if
you are exiting Valet Mode.

■ Open any door. Press the 

button on your transmitter. Within one

second, press the 

button on your transmitter. Within one second,

press the 

button on your transmitter again. The status LED will stay

on if you have entered Valet Mode, and it will go out when exiting Valet

Mode.

■ To enter Panic mode, press the 

button on your transmitter. The horn

will sound and the lights will flash for 30-seconds. To stop panic mode
press the 

, 

, or 

button on your transmitter.

✂✂

✂ ✂