Q-See QSDL506W 用户手册

 

 

P a g e

1.  Position the Magnetic Window/Door Sensor Alarm (Picture 2) 

along the conjoining edges of any window or door you wish to 

protect using heavy duty double-sided adhesive tape.  It is 

recommended to use your Magnetic Window/Door Sensor 

Alarms on entries and windows that are most susceptible to 

break-ins and vulnerable to intruders.   

2.  To ensure maximum performance of your Magnetic 

Window/Door Sensor Alarms, position the edge of the alarm 

transmitter no more than 10mm away from the edge of the 

magnet.   

1.  Remove the battery compartment cover on the back of the 

Infrared Sensor, insert 4 “AA” alkaline batteries and replace the 

battery compartment cover.  

2.  Hang the Mounting Bracket (using the included hardware) at 

approximately 3-5 feet high in an area that is free from 

obstruction.   

3.  Attach the Infrared Sensor (Picture 4) to the Mounting Bracket 

after you have decided on your desired location and adjust the 

directional angle to a degree that maximizes the scope of the 

Infrared Sensor.  It is suggested that you keep the area around 

your Infrared Sensor clear of obstacles and avoid placing it in 

direct sunlight.