Raritan Computer Home Security System 用户手册
Chapter 15: Advanced Administration
217
Recommended DHCP Configurations for CC-SG
Review the following recommended DHCP configurations. Make sure
that your DHCP server is set up properly before you configure CC-SG to
use DHCP.
that your DHCP server is set up properly before you configure CC-SG to
use DHCP.
•
Configure the DHCP to statically allocate CC-SG's IP address.
•
Configure the DHCP and DNS servers to automatically register the
CC-SG with the DNS when the DHCP allocates an IP address to
CC-SG.
CC-SG with the DNS when the DHCP allocates an IP address to
CC-SG.
•
Configure the DNS to accept un-authenticated Dynamic Domain
Name System (DDNS) registration requests from CC-SG.
Name System (DDNS) registration requests from CC-SG.
Configuring Logging Activity
You can configure CC-SG to report to external logging servers and
specify what level of message is reported in each of the logs.
specify what level of message is reported in each of the logs.
To configure CC-SG logging activity:
1. Choose Administration > Configuration.
2. Click the Logs tab.
3. To assign an external log server for CC-SG to use, type the IP
address in the Server Address field under Primary Server.
4. Click the Level to Forward drop-down arrow and select an event
severity level. All events of this level or higher will be sent to the
logging server.
logging server.
5. To configure a second external log server, repeat steps 3 and 4 for
the fields under Secondary Server.
6. Under CommandCenter Log, click the Level to Forward drop-down
menu and select a severity level. All events of this level or higher will
be reported in CC-SG's own internal log.
be reported in CC-SG's own internal log.
7. Click
Update
Configuration to save your changes.
Purge CC-SG's Internal Log
You can purge the CC-SG's internal log. This operation does not delete
any events recorded on your external log servers.
any events recorded on your external log servers.
Note: The Audit Trail and Error Log reports are based on CC-SG's
internal log. If you purge CC-SG's internal log, these two reports will also
be purged. You can also purge these reports individually. See
internal log. If you purge CC-SG's internal log, these two reports will also
be purged. You can also purge these reports individually. See
Purge a
report's data from CC-SG
(on page 182).
To purge CC-SG's internal log:
1. Choose Administration > Configuration.