Raritan Computer Home Security System 用户手册

 

Chapter 4: Configuring CC-SG with Guided Setup 

 

The Discover Devices panel opens when you click Continue at the end of 
the Associations task. You can also click Device Setup, and then click 
Discover Devices in the Guided Tasks tree view in the left panel to open 
the Discover Devices panel.  

 

1.  Type the IP address range in which you want to search for devices in 

the From address and To address fields. 

2.  Type the subnet mask in which you want to search for devices in the 

Mask field. 

3.  In the Device types list, select the type of device you want to search 

for in the range specified. Press and hold down the Ctrl key while 
you click device types to select multiple device types. 

4.  Select the Broadcast discovery checkbox if searching for devices on 

the same subnet on which CC-SG resides. Deselect the Broadcast 
discovery checkbox to discover devices across all subnets. 

5. Click 

Discover. 

6.  If CC-SG has discovered devices of the specified type and in the 

specified address range, the devices appear in a table in the bottom 
section of the Discover Devices panel. Click the black arrow at the 
top of the panel to hide the top section, expanding your view of the 
discovery results in the bottom section of the panel. 

7.  In the table of discovered devices, select the device you want to add 

to CC-SG, and then click Add. The Add Device panel opens. The 
Add Device panel is slightly different, depending on the type of 
device you are adding. 

8.  You can change the Device name and Description by typing new 

information in the corresponding fields. 

9.  Confirm that the IP address you assigned when you prepared the 

device to be added to CC-SG displays in the Device IP or Hostname 
field, or type the correct address in the field if necessary. 

10.  The TCP Port Number field will be populated automatically based on 

the device type. 

11.  Type the Username and Password you created when you prepared 

the device to be added to CC-SG in the corresponding fields. 

12.  In the Heartbeat timeout field, type the number of seconds that 

should elapse before timeout between the device and CC-SG. 

13.  If you are adding a Dominion SX or Dominion KXII version 2.2 or 

later device, select the Allow Direct Device Access checkbox if you 
want to allow local access to the device. Deselect the Local access: 
Allowed checkbox if you do not want to allow local access to the 
device.