Raritan Computer Home Security System 用户手册

 

Chapter 6: Devices, Device Groups, and Ports 

 

You can delete a blade chassis device connected to a KX2 device from 
CC-SG. When you delete the blade chassis device from the KX2 device, 
the blade chassis device and all configured blade servers or slots 
disappear from the Devices tab as well as from the Nodes tab. 

 

1.  Click the Devices tab and select a KX2 device whose blade chassis 

device you want to delete. 

2.  Choose Devices > Port Manager > Delete Ports. 

3.  Select the checkbox of the blade chassis port you want to delete. 

4.  Click OK to delete the selected blade chassis port. A message 

appears asking you to confirm the deletion of the blade chassis 
device along with all of its blade servers. 

 

When physically moving a blade chassis device from one KX2 device or 
port to another KX2 device or port, CC-SG cannot detect and 
automatically update the configuration data of the blade chassis device 
to the new port. You must configure the blade chassis device on CC-SG 
once again. 

 

1.  Delete the blade chassis device from CC-SG. See 

 (on page 47). 

2.  Disconnect and reconnect the blade chassis to another KX2 device 

or port. 

3.  Add the blade chassis device in CC-SG. See 

 (on page 43). 

 

This section applies only to the blade chassis without an integrated 
KVM switch, such as HP BladeSystem series. 

You may re-configure blade servers beneath the virtual blade chassis as 
normal KX2 ports in the Devices tab. 

 

1.  In the Devices tab, select the KX2 device whose blade servers you 

want to re-configure as normal KVM ports.