Raritan Computer Home Security System 用户手册

Chapter 7: Managed Powerstrips 
 

You cannot delete a PowerStrip connected to a  KX, KX2, KX2-101, 
KSX2, or P2SC device from CC-SG. You must physically disconnect the 
PowerStrip from the device to delete the PowerStrip from CC-SG. When 
you physically disconnect the PowerStrip from the device, the PowerStrip 
and all configured outlets disappear from the Devices tab. 

 

You can perform the following tasks in CC-SG to configure and manage 
PowerStrips connected to SX 3.0 or KSX devices. 

•  Add a PowerStrip Connected to an SX 3.0 or KSX device

 (on 

page 72) 

•  Delete a PowerStrip Connected to an SX 3.0 or KSX Device

 (on 

page 73) 

•  Change a PowerStrip's Device or Port Association (SX 3.0, KSX)

 

(on page 73) 

 

1.  Add the SX 3.0 or KSX device to CC-SG. See 

 (on page 34). 

2.  Choose Devices > Device Manager > Add Device. 

3.  Click the Device type drop-down menu and select PowerStrip. 

4.  Type a name for the PowerStrip in the Power Strip Name field. Hold 

your cursor over the field to see the number of characters allowed in 
the name. Spaces are not permitted. 

5.  Click the Number of Outlets drop-down menu and select the number 

of outlets this PowerStrip contains. 

6.  Click the Managing Device drop-down menu and select the SX 3.0 or 

KSX device that is connected to this power strip. 

7.  Click the Managing Port drop-down menu and select the port on the 

SX 3.0 or KSX device to which this power strip is connected. 

8.  Type a short description of this PowerStrip in the Description field. 

Optional. 

9.  Select Configure All Outlets if you want to automatically add each 

outlet on this PowerStrip device to the Devices tab. If you don't 
configure all outlets now, you can configure them later. See 

 (on page 75). Optional.