SVAT Electronics CV301-8CH 用户手册

CV301-8CH

now you can see

•  The camera should be installed between 8 and 13ft above the area to be monitored
•  Before screwing in the mount for the camera ensure there are no obstructions in the camera’s view
•  Place cameras in the most strategic places where they can provide detailed, recorded video of every visitor. 
•  Having the camera in the open for people to see can help deter criminals 
•  To cover large, dark areas such as backyards, garages, and driveways, place cameras in strategic locations, 

such as on the roof or deck, this way, less cameras are needed to cover an area

•  Ensure that the sunshade is positioned to avoid glare and be sure to position camera away from direct 

sunlight or other light sources 

•  For best results, the light in front of the camera should be about the same brightness as the light around the 

area or object being monitored

•  Decide whether the camera will be wall-mounted, ceiling mounted or sit on a desk/table top. If you are 

mounting the camera on a wall or ceiling, use the included mounting hardware. We recommend that the 

mounting bracket is secured using the included screws for all installations

•  Each camera comes with 60ft of video/power wire please make sure that you mount the cameras no more 

than 60ft from the DVR. If longer wiring distance is required, 60ft extensions can be purchased (CVW62 ) from 

your local re-seller or at www.SVAT.com

•  We recommend using a surge protected power bar to protect the camera’s internal circuitry

1.  Decide if the camera will be wall-mounted or sit on a 

desk/tabletop. The camera can be adjusted for either 

mounting scenario by rotating it to the    

required position.

2.  Screw the mounting bracket into the camera’s 

mounting hole, turning it clockwise.

3.  Mount the camera in the desired location no more 

than 60 ft from the DVR unless you have purchased 

additional wiring. You may mount the cameras on a 

wall, ceiling or desk.

4.  Ensure that the cameras are strongly secured into  

the wall. 

5.  Adjust cameras to the desired viewing angles.
6.  For additional help on mounting the cameras, please 

see the drilling template, located at the back of  

the manual.