Soundcraft RK-65K 用户手册
Radio Key
®
RK-65K Operating Guide
Secura Key
4
PROGRAMMING RADIO KEY
®
RK-65K
When the RK-65K is fi rst powered up, the LED will be fl ashing
Red and Green. Present a card to the unit to set the Facility
Code and the fl ashing will end in approximately 10 seconds.
Red and Green. Present a card to the unit to set the Facility
Code and the fl ashing will end in approximately 10 seconds.
Radio Key Transponders (Key tags and cards) are pre-encoded
and engraved at the factory with a Facility (Site) Code and an
individual card ID number.
and engraved at the factory with a Facility (Site) Code and an
individual card ID number.
You must teach the RK-65K which Facility Code or Codes
(up to 10) it should recognize. You must also enroll the card
ID numbers that will be Valid. The Radio Key
(up to 10) it should recognize. You must also enroll the card
ID numbers that will be Valid. The Radio Key
®
cards and tags
are sequentially numbered, so you can validate a block of
transponders.
transponders.
Be sure to make a record of each person who is issued a
transponder along with the ID number of their card or tag.
transponder along with the ID number of their card or tag.