X10 Wireless Technology DS7000 用户手册

• Set the slide switch on the Motion Detector to position 1.

• Press and hold the TEST button for about a second. The LED flashes twice when you

release it.

• Wait 20 seconds for the sensor to settle.

• Walk in front of the Motion Detector. The indicator LED lights each time it senses

movement. Check the coverage area and reposition the sensor as required.

• Press the TEST button to return to normal operating mode.

Note: The Motion Detector will automatically return to normal operating mode after
about 2 minutes.

• Attach the Motion Detector to a wall at a height of 5 to 6ft using the mounting bracket

and screws provided.

Note: The Motion Detector has a special lens that 'looks' downwards. It must therefore
be mounted to face outwards horizontally, i.e. do not 'aim' the sensor downwards.

• Set the slide switch to position 1 for instant triggering for maximum sensitivity or

position 2 to trigger only after two movements have been sensed.

• Fit four AA Alkaline batteries in the battery compartment.

• Press the CODE button on the back of the Motion Detector using a pencil or other

pointed object to generate a new random security code.

• Set the slide switch on the Security Console to INSTALL.

• Press the TEST button on the Motion Detector. The console beeps once to confirm

and the next available zone LED lights.

Note: If the Motion Detector senses movement before you press the TEST button it
may register itself automatically.