Bosch 3.5 用户手册
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 3 | Control Equipment
en | 97
The Faults ... menu screen itself shows the number of
active faults in the system. For example:
active faults in the system. For example:
The numbered menus in the faults menu shows the
name of the fault and the unit that generated the fault.
For example:
name of the fault and the unit that generated the fault.
For example:
In this case the fault is Overload, which was generated by
the unit named PAM_01. The menu items in the faults
menu provide additional information about the selected
fault and allow to acknowledge and reset faults (see
table 5.9).
the unit named PAM_01. The menu items in the faults
menu provide additional information about the selected
fault and allow to acknowledge and reset faults (see
table 5.9).
The faults and fault details displayed by the network
controller are closely related to the faults that are
displayed in the Logging Viewer (see chapter 57). In table
5.11, all faults that can be displayed by the network
controller are listed. Use this table in combination with
the information in chapter 54 to find out the cause of a
fault or the recommended action to take.
controller are closely related to the faults that are
displayed in the Logging Viewer (see chapter 57). In table
5.11, all faults that can be displayed by the network
controller are listed. Use this table in combination with
the information in chapter 54 to find out the cause of a
fault or the recommended action to take.
5.6.6
Main menu
The Menu ... item (see figure 5.12) provides access to the
main menu.
main menu.
Note
In the next table, n indicates the nth fault in the
In the next table, n indicates the nth fault in the
faults menu, whereas N indicates the total
number of faults in the faults menu.
table 5.9: Faults menu
Menu item
Description
nA Serial Nr
Shows the serial number of the
unit that generated the fault n.
nB Detail
Shows the fault detail of fault n.
nC Date/Time
Shows the date and time on
which fault n occurred.
nD Status
Shows the status of fault n
See chapter 51
nE Acknowledge
Acknowledge the selected fault.
See chapter 51.
nF Reset
Reset the selected fault. See
chapter 51.
N+1 Ack All
Allows to acknowledge all faults
in the system. See chapter 51.
N+2 Reset All
Resets all faults in the system.
See chapter 51.
Faults ...
27 faults
27 faults
23 Overload
PAM_01
PAM_01
table 5.10: Main menus
Menu item
Description
1 Monitoring
Go to the Monitoring submenu.
See section 5.6.7.
2 Setup
Go to the Setup submenu. See
section 5.6.8 (and further).