Paradox Hellas S.A. EVO192 用户手册

Options [1] and [2]: Master Feature
When option 

 is OFF, the User cannot program other users into the system.

When option 

 is ON and option 

 is OFF, the user can program and modify user 

access codes (P.I.N. only) and User Labels. 

When both options 

 and 

 are ON, the user has Full Master rights. The user can 

create or modify user access codes, User Options, User Access Control Options, Access 
Card Numbers, User Labels and Area Assignments according to their own programming. 
For example, if the Full Master User has access to area #1 and option 

 (Bypass) only, 

the Full Master user can only assign area #1 and option 

 to other users in the system. 

Option [3]: Duress 
When option 

 is ON, the Duress feature is enabled. This feature is used when 

someone forces a user to arm or disarm an area(s). By entering a user access code 
(P.I.N.) reserved for the Duress feature, the system will arm or  disarm the area(s), and 
then send a silent alarm to the monitoring station. 

Option [4]: Bypass
When option 

 is ON, the Bypass feature is enabled. This feature allows the user to 

deactivate zones when arming the area(s).

Option [5]: Arm Only 
When option 

 is ON, the Arm Only feature is enabled. The user can arm assigned 

areas with either a card or code, but cannot disarm. When the option is OFF, the user 
can either arm or disarm assigned areas.

Option [6]: Stay & Instant Arm 
When option 

 is ON, the Stay and Instant arm features are enabled. The user can now 

Stay or Instant arm their assigned areas.

Option [7]: Force Arm 
When option 

 is ON, the Force arm feature is enabled. The user can now Force arm 

their assigned areas.

Option [8]: Area Access 
When option 

is ON, the keypad will permit access to all the areas assigned to the 

user access code. When option 

 is OFF, the keypad will only permit access to the 

areas it controls. For example, the keypad is assigned area 1 only, and your user access 
code is assigned areas 1 to 8. If the option is ON, you can access all eight areas from the 
keypad. If the option is OFF, you can only access area 1. 

Option [1]: Access Control 
When option 

 is ON, the user can gain access to an access control door when Access 

Control is enabled in the system. A user that is not assigned to any partition, but has the 
Access Control option (Option [1]) enabled, can now gain access to an access control 
door by entering a code # (P.I.N.) and then pressing the 

 keypad key. When the 

option is OFF, the user cannot access an Access Control door.

Option [2]: Can Disarm with Access Card
When option 

 is ON, a User’s Access Control card can unlock and disarm an armed 

Access Control door. When option 

 is OFF, follow the settings in option