Rinnai V3237FFU 用户手册
16
Rinnai Corporation
V3237 Models
DELUXE BATHROOM CONTROLLER
Using Water Smart / Bath Fill
Press “Water Smart / Bath Fill” button once. The “Water Smart / Bath
Fill” button will illuminate and a tone will sound. The “Bath” indicator
will also be displayed in the Kitchen Controller Monitor (Deluxe
Models ONLY).
Fill” button will illuminate and a tone will sound. The “Bath” indicator
will also be displayed in the Kitchen Controller Monitor (Deluxe
Models ONLY).
The voice prompt will say “The hot water system is ready. Open the
hot water tap”.
hot water tap”.
Open the hot water tap for the relevant shower or bath.
The “In Use” indicator
will illuminate at all Deluxe Temperature
Controller(s) and the shower will run or the bath will start to fill.
To Stop Water Smart / Bath Fill Operation
If you wish to stop the water flow after the “Water Smart / Bath Fill”
function is selected, simply press the “Water Smart / Bath Fill” button.
The “Water Smart / Bath Fill” button will flash and the voice prompt
will say “Hot water is not available, turn off all hot water taps and
push the Bath Fill button”. Follow the voice prompt instructions.
function is selected, simply press the “Water Smart / Bath Fill” button.
The “Water Smart / Bath Fill” button will flash and the voice prompt
will say “Hot water is not available, turn off all hot water taps and
push the Bath Fill button”. Follow the voice prompt instructions.
When Water Smart / Bath Fill Operations Finishes
Once the “Water Smart / Bath Fill” operation finishes, the following
events will occur:
events will occur:
1.
The flow from the shower / bath hot water tap will cease.
2.
The “Water Smart / Bath Fill” button will flash.
3.
The Kitchen Controller ‘Bath’ indicator will flash (Deluxe Models)
4.
A tone will sound.
5.
The voice prompt will say “Bath fill is complete. Turn off the
bath hot water tap and push the “Bath Fill” button.
Follow the voice prompts instructions. Note that the
hot water unit will not allow hot water to flow from any
fixture until the ‘Water Smart / Bath Fill’ button has
been changed.
hot water unit will not allow hot water to flow from any
fixture until the ‘Water Smart / Bath Fill’ button has
been changed.
6.
The “Water Smart / Bath Fill” Button light on
the Bathroom Controller and the “Bath” indicator
on the Kitchen Controller monitor will go out.
on the Kitchen Controller monitor will go out.
COMBINING CONTROLLERS AND DELUXE CONTROLLERS
Controller and Deluxe Controller can be combined and will function as described in other
sections of this manual. Refer to the Temperature Table page to confirm the maximum
number and combination of controllers that can be fitted to all water heater models. When
using two Deluxe controllers, only one Controller MC-100V-1US can be installed.
Controller and Deluxe Controller can be combined and will function as described in other
sections of this manual. Refer to the Temperature Table page to confirm the maximum
number and combination of controllers that can be fitted to all water heater models. When
using two Deluxe controllers, only one Controller MC-100V-1US can be installed.
HOT
HOT
COLD
ON!
OFF!
COLD