Heath Zenith 3035748 (AC-6195) 用户手册

-3-

1 2

 3

 4

 5

 6

 7

 8

1 2

 3

 4

 5

 6

 7

 8

Install an alkaline type A23 12 Volt battery. The 
positive terminal should be positioned as shown.

* Code Settings 1-7 

Must Match Both 

Push Button and 

Chime

Inside Push 

Button

Inside Chime

Tune Setting

(Not used on 

all models)

Chime does not sound:
•  Make sure push button and chime codes are the same (See pages 2 and 3).
•  Check orientation of push button battery (See page 3).
•  Check charge of push button and chime batteries, replace if necessary.
Batteries seem OK, but the chime does not work when installed:
•  Do  not  mount  chime  or  push  button  on  metal  or  near  metal  studs. This 

reduces the transmitter range. Use 1/4" to 1/2" (6 to 13 mm) wood shims to 
move chime or push button off metal surface.

•  Concrete floors may reduce range. Move chime away from floor.
•  Try locating chime closer to push button.
The range of the wireless chime can vary with location, temperature and bat-
tery condition.

ACE

®

 reserves the right to discontinue and to change specifications at any time 

without notice without incurring any obligation to incorporate new features in 
previously sold products.

Note: Some models might require the use of 

tweezers to remove and replace the jumpers.

Tune 

Setting