Eureka 2590 Series 用户手册
7
STEP
3
CLEAN UP AND STORAGE
Before storing the extractor for long periods of time, it is a good idea to set the shampoo
control on rinse and push the spray button for 10 seconds. This flushes the shampoo residue
from the pump. Place cleaner on a surface where water can easily be cleaned up. If any
attachments have been used clear hose line in same way.
A. Empty the Recovery Tank
See page 6 for instructions.
B. Clean Suction Cover
CAUTION: Turn off the power switch and unplug the electrical cord before cleaning.
1) Slide the suction cover release tabs up on each side of the suction cover.
2) Remove the suction cover and clean the area of dirt and lint.
3) Replace the suction cover by sliding the tabs on top of the suction cover into the top slots on the hood.
2) Remove the suction cover and clean the area of dirt and lint.
3) Replace the suction cover by sliding the tabs on top of the suction cover into the top slots on the hood.
Suction Cover
Release Tabs
Suction
Cover
C. Folding the Handle for Compact Storage
1) Turn upper handle release to collapse the upper handle.
2) Press on handle release pedal to fully collapse handle.
2) Press on handle release pedal to fully collapse handle.
Upper Handle
Release
Handle
Release
Pedal
Upper
Handle
Release