Hitachi hitachi air purifier with humidifying function 用户手册
E-3
Operation Buttons and Indicators /
Featur
es / Name of Each Component / Operation Buttons and Indicators / Accessories
Air Sensor
P.E-14
Level of air contamination detected
by the odor sensor is shown by how
the indicator is lit. (Indicator: Green)
by the odor sensor is shown by how
the indicator is lit. (Indicator: Green)
Clean Humidifying Filter
P.E-17
Shows the time to clean the
humidifying filter. (Indicator: Red)
humidifying filter. (Indicator: Red)
P.E-OO
shows a page with further description.
Operation Buttons and Indicators
Indicates approx. humidity level in the
room during operation.
room during operation.
Low
Moderate
High
Orange Orange
Orange Orange
Green
Indicates airflow rate during operation.
(Indicator: Green)
(Indicator: Green)
: Airflow rate during auto operation
: Indicates eco operation is active.
: Indicates eco operation is active.
When airflow rate is switched using the airflow button on
the remote controller, the selected airflow rate is indicated.
the remote controller, the selected airflow rate is indicated.
: Silent
: Med
: Med
: Strong or Max (blinking)
On/Off Button
P.E-13
Use this button to start
or stop operation and to
switch the operation mode.
or stop operation and to
switch the operation mode.
Infrared Remote Receiver
Receives remote
control signal.
control signal.
Shows the operation mode.
Air Purify, Pollen, Strong
Deodorization
Indicator: Green
When strong deodorization and timer
functions are used in combination,
the indicator blinks in orange.
Deodorization
Indicator: Green
When strong deodorization and timer
functions are used in combination,
the indicator blinks in orange.
Humidify, Skin Moisturize
Indicator: Orange
Indicator: Orange
Timer
P.E-13
The indicator is lit when
4-hour timer is set.
(Indicator: Orange)
4-hour timer is set.
(Indicator: Orange)
Remote Controller
Point the remote controller at the infrared receiver on the purifier when you operate.
The remote controllable distance is approx. 6m maximum when pointing the remote
The remote controllable distance is approx. 6m maximum when pointing the remote
controller squarely to the receiver.
On/Off Button
P.E-10
Press this button to start or
stop operation.
eco Button
P.E-16
Press this button to start or
stop eco operation.
stop eco operation.
Max button
P.E-13
Press this button to start
max operation.
Airflow Button
P.E-12
Press this button to switch
airflow rate.
airflow rate.
Mode Button
P.E-11
Press this button to switch
operation mode.
operation mode.
Timer Button
P.E-13
Press this button to set
Off-timer.
Off-timer.
Sensor Setting Button
P.E-15
Press this button to switch
sensor sensitivity.
sensor sensitivity.
Note
The remote control may not work in a room where inverter lighting apparatus or electronic quick
start lighting apparatus is used, or when the infrared receiver is exposed to direct sunlight.
start lighting apparatus is used, or when the infrared receiver is exposed to direct sunlight.
If you operate the remote controller not pointing straight to the front face of the purifier, the sensitivity
will be reduced. Operate the controller from the place in front of the purifier whenever possible.
will be reduced. Operate the controller from the place in front of the purifier whenever possible.
Operation Mode
P.E-11
Humidity Level
P.E-10, E-14
Airflow Level
P.E-12
T_S-EP-A5000.indd 3
T_S-EP-A5000.indd 3
11/14/2011 1:58:30 PM
11/14/2011 1:58:30 PM