Winix Air Cleaner 用户手册

•  PlasmaWave™  (All)
  In the final stage of cleaning, Winix 
  PlasmaWave

TM 

technology generates 

  both positive and negative ions to create 
  plasma clusters which instantly neutralize 
  viruses, bacteria, chemical vapors and 
  odors in the air.

5

NOTE: Follow these instructions for best 
results.

•  Place unit at least 7 feet from equipment 
  that emits electric waves such as  
  televisions or radios.
•  Place unit at least 2 feet from the wall.
•  Keep sensors away from drafty areas.
•  Keep curtains away from sensors, as  
  they may interfere with air intake/outlet.
•  Place unit on a stable surface with plenty  
  of air circulation.

1. Remove protective film from the 
  control panel.

2. Remove the front 
  panel by grasping 
  the bottom outside 
  edges and gently 
  pulling toward you. 

3. Pull out the filter 
  cassette by grasping 
  the tabs located on 
  each side of the filter
  cassette. (There are
  no tabs on 5000B
  HEPA filter.)

4. Remove the plastic 
  wrap from the filter 
  cassette.

5. Return the filter 
  cassette into the 
  main unit.

6. Replace the front panel 
  by hooking the front 
  panel on the top of the 
  unit. Swing panel in by 
  pushing gently until the
  panel snaps into place.

7. Plug in the power cord to a wall outlet.  

8. Press POWER button until short 
  “beep” is heard.

For the first 4 minutes after turning the 
unit on, the dust and odor indicators will 
flash while the unit measures air quality. 

•  Washable Carbon Filter 

  (5000 & 5000S)
  Activated granular carbon effectively  
  collects chemical vapors and odors 
  caused by cigarette smoke, organic 
  decay, and cooking.