New Buck Corporation 34 用户手册

下载
页码 55
 
OPERATING INSTRUCTIONS 
Before operating this appliance, proceed through the following checklist. 
 
1.  Read and understand these instructions before operating this appliance. 
 
2.  Check that there are no gas leaks.  If you smell gas do not attempt to light this appliance. 
 
3.  Verify that log placement is correct. 
 
 
 
 
LIGHTING INSTRUCTIONS 
SIT-MILLIVOLT VALVE 
FOR YOUR SAFETY READ BEFORE LIGHTING 
 
 
WARNING:  If you do not follow these instructions exactly, a fire or explosion may  result 
causing property damage, personal injury, or loss of life. 
 
A.  This appliance has a pilot which must be lighted by hand.  When lighting the pilot follow 
these instructions exactly.  If piezo fails, then light the pilot using matches.  Refer to the match 
lighting instructions. 
B.  BEFORE LIGHTING  smell all around the appliance area for gas.  Be sure to smell next to 
the floor because some gas is heavier than air and will settle to the floor. 
 
WHAT TO DO IF YOU SMELL GAS: 
 
* Do not try to light any appliance. 
 
* Do not touch any electric switch;  do not use any phone in your building. 
 
* Immediately call your gas supplier from a neighbor’s phone.  Follow the gas supplier’s  
 
   instructions. 
 
* If you cannot reach your gas supplier, call the fire department. 
 
C. Use only your hand to push in or turn the gas knob.  Never use tools.  If the knob will not 
push in or turn by hand, don’t try to repair it. Call a qualified service technician.  Force or 
attempted repair may result in a fire or explosion.” 
 
D. Do not use this appliance if any or part of it has been under water.  Immediately call a 
qualified service technician to inspect the appliance and to replace any part of the control system 
and any gas control which has been under water.”
 
 19