Regency G36D-NG NATURAL GAS 用户手册

UltraGlow G36D Zero Clearance Direct Vent Gas Fireplace

Rigid Pipe Adaptor

(Part# 510-994)

Pipe Length

Vertical

Terminal

Storm Collar

(Part # 953)

Flashing

943 or 943S

Ceiling Firestop

(Part # 963)

24" Pipe

Length

Adj.Pipe Length

11" - 14-5/8"

90 Elbow

o

Horizontal

Termination Cap

(Part# 946-523/P)

Wall Thimble

(Part # 942)

Vinyl Siding

Standoff (Optional)

(Part #950)

The minimum components required for a basic horizontal termination 
are:

 1 Horizontal 

Termination 

Cap

 1 90

o

 Elbow 

 1 Rigid 

Pipe 

Adaptor

 1 Wall 

Thimble

  1  Length of pipe to suit wall thickness (see chart) 

Wall thickness  is measured from the back standoffs to the inside mounting 
surface of termination cap. For siding other than vinyl furring strips may 
be used, instead of the vinyl siding standoff, to create a level surface to 
mount the vent terminal. The Terminal must not be recessed into siding. 
Measure the wall thickness including furring strips.

If a Vinyl Siding Standoff is required (it must be used with vinyl siding), 
measure to outside surface of wall without siding and add 2 inches.

            Wall Thickness                  Vent Length
                  (inches)                     Required (inches)
 4" 

- 

 

    5-1/2" 

6"

 7" 

- 

    8-1/2" 

9"

 10" 

- 

  11-1/2"                              12" 

 9" 

- 

  14-1/2"         11" - 14-5/8" Adj. Pipe

 15" 

- 

  23-1/2" 

17" - 24" Adj. 

Pipe

            Wall  Thickness                   

                   (inches)                     Required (inches)
 

3-1/4"  -      6-3/4"            11" - 14-5/8" Adj. Pipe

 7-3/4" 

- 

 16-1/4" 

17" - 24" Adj. Pipe

 7-1/4" 

- 

   8-3/4" 

6" + 12"

  

 

 

9" 

+ 

9"

 4-1/4" 

- 

   5-3/4" 

6" + 9"

This product has been evaluated by Intertek for 
using a Dura-Vent Flue Adaptor in conjunction 
with Selkirk Direct-Temp and Ameri Vent Direct 
venting systems. Use of these systems with the 
Direct Vent GS starting collar is deemed accept-
able and does not affect the Intertek WHI listing 
of components.

Do not combine venting components from
different venting systems.

However use of the the AstroCap

TM

 and FPI 

Riser is acceptable with all systems.

The FPI AstroCap

TM 

and FPI Riser Vent terminal is certifi ed for installations using FPI venting systems as well as Simpson Dura-Vent®, Direct Vent GS, 

American Metal Products, Ameri Vent Direct vent and Selkirk Direct-Temp. FPI

TM

, and FPI AstroCap

TM

 are the proprietary trademarks of FPI Fireplace 

Products International Ltd. Dura-Vent® and Direct Vent GS are registered and/or proprietary trademarks of Simpson Dura-Vent Co. Inc.