CarAlarms.com P90-NG1 用户手册

Excalibur

®

 P90 Zero Clearance Direct Vent Gas Fireplace

Door

Flange

1)  Attach door bracket to side using 2 

screws.

1)  Fit top door bracket over the fl ange at the 

top of the fi rebox.

2)  Secure with 2 screws on the bottom.

 

Single Screen Door - only attach to right 
side of unit.

 

Double Screen Door - attach to left and right 
side of unit.

2)  Slide the door(s) onto the hinges.

3)   Single Screen Door only: Push the Locking 

Ball Pin into the hole on the left side. Squeeze 
the clamp (use pliers) and slide it over the 
end of the Locking  Ball Pin and tight against 
the Facade edge. 

1)  Place the Arch Surround into position by 

sliding the 2 holes in the bottom brackets 
over the pins on the base.

2)  Slide the 2 screws on the rear of the Arch 

Surround into the bracket on the Glass Door 
and then tighten screw to secure.

3)  Slide Bottom Louver into position. On each 

side secure the bottom screw fi rst into the 
side bracket. Do not overtighten, leave 
slightly loose to allow the louver to move 
freely. Then tighten the top screw.

4)  Attach the two control boxes to the bottom 

unit base and tighten the 2 screws on the 
left side and 1 screw on the right side.