Desa RGA 2-72 用户手册

3

Hearth Kit Model _________________________

Serial Number ___________________________

Log Set Model ___________________________

Grate

Burn-
er Pan

Burner 
Manifold

Burner Inlet 
Fitting

Burner 
Clamp

Grate Steps

1.  Remove logs, hearth kit, pan materials, and hardware from car-

ton.

2.  Remove all protective packaging applied to logs and base for 

shipment.

3.  Check all items for any shipping damage. If damaged, promptly 

inform dealer where you bought the product.

Install and use log set with care. Follow all local codes. In the 
absence of local codes, use the latest edition of The National Fuel 
Gas Code ANSI Z223.1/NFPA 54*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

ON/OFF SAFETY VALVE/PILOT KIT AND PRO-
PANE/LP CONVERSION

An optional valve/safety pilot kit with a piezo ignitor is available 
for this appliance. This system requires no matches, batteries, or 
other sources to light. You must use this optional system for LP 
conversion. See Accessories, page 15.

An optional millivolt valve/safety pilot kit with a piezo ignitor is avail-
able for this appliance. This system requires no matches, batteries, or 
other sources to light. This system may be connected to a wall switch 
or hand-held wireless remote control. See Accessories, page 15.

There is an optional hand-held ON/OFF remote control that can 
be purchased separately for this log set. You must use the millivolt 
valve/safety pilot kit to use remote accessories with this appliance. 
See Accessories, page 15.

A wall switch is also available for this appliance. You must use 
the millivolt valve/safety pilot kit to use the wall switch with this 
appliance. See Accessories, page 15.

11.  Do not run log set

• where fl ammable liquids or vapors are used or stored
•  under dusty conditions

12. Do not burn solid fuel in the fi replace after installing the log set. Do 

not use this log set to cook food or burn paper or other objects.

13. Log set becomes very hot when in use. Keep children and adults 

away from hot surface to avoid burns or clothing ignition. Log 
set will remain hot for a time after shutdown. Allow surface to 
cool before touching.

14.  Carefully supervise young children when they are in the room 

with log set. 

15.  Do not use appliance if any part has been exposed to or under 

water. Immediately call a qualifi ed service technician to inspect 
the room appliance and to replace any part of the control system 
(if using GA9050A or GA9150A) and any gas control which 
has been under water. 

16.  To help prevent breakage, new logs must be broken-in (see 

Curing Logs page 10).

17. Turn log set off and let cool before servicing, installing, or re-

pairing. Only a qualifi ed service person should install, service, 
or repair log set. 

18.  Provide adequate clearances around air openings.