Mitsubishi Electronics PE-8MYC 用户手册

- 102 -

2

B

3

D F

When selecting operation

For cooling

Press the [MODE] button     and bring up the “COOL” display.

Operation mode display

*  When the air conditioner is used together with burners, 
   thoroughly ventilate the area. Insufficient ventilation can 
   result in accidents due to oxygen deficiency.
*  Never place a burner at a place where it is exposed to the 
   airflow from the air conditioner.
   Doing so can result in imperfect combustion of the burner. 

B

2

3

For fan

Press the [MODE] button     and bring up the “FAN” display.
*  The fan operation functions to circulate the air in the room.
*  The temperature of the room cannot be set by fan operation.

Never expose your body directly to cool air for a long time. 
Excessive exposure to cool air is bad for your health, and 
should therefore be avoided.

To change room temperature

Set temperature display and      room temperature display

Press the [SET TEMP] button     and set the room
temperature of your choice.

Press           and          button together, the unit of
temperature  change “˚C ” (degree-centigrade) and “˚F ”. 
(degree-Fahrenheit)

Press            or            button once changes the setting
by 1˚C. If the pressing is continued, the setting continues
to change by 1˚C.

*  Indoor temperature can be set within the following
   range.

Cooling       19 ~ 30 ˚C

*  It is impossible to set the room temperature by the
   air-blow operation.

D

F

Press the [MODE] button     and bring up the “HEAT” display.

For heating (PEH only)

Heating       17 ~ 28 ˚C  (PEH only)

For Auto change over    (PEH only)

Press the [MODE] button     and bring up the “AUTO” display.

  This function is special order. Please consult your local
  Mitsubishi Electric Sales office for application advice on this
  function.
  Because this function need low ambient cooling parts as 
  option.
  Indoor temperature can be set within the following range.

Press the [MODE] button

Consecutive press of the [MODE] button switches the operation over 
to “FAN”, “COOL”, “HEAT” and    “AUTO”.
For the contents of operation, check the display.

2

2

2

2