Mitsubishi Electronics PE-8MYC 用户手册

- 5-

The sensible cooling capacity has been significantly
improved through balanced optimised heat 
exchanger design.

The EER(Energy Efficiency Ratio) on these models
is greatly improved by revised design specifications
and by being manufactured stringently to Mitsubishi
Electric high quality standards.

PE, PEH-15,20 feature belt driven Supply Air fans
enabling accurate matching of actual airflow rates
to the specified quantities. Accurate commissioning
is assisted by the capability to change pulleys and
belts if necessary to achieve the desired air balance.

The unit operation can commence immediately after
connecting to the power supply, refrigerant piping,
drain piping, ducting and control system.

In applications with relatively high internal loads,
there may be a requirement for all series to
operate on cooling at low ambient conditions.
Special order parts is available to maintain the 
refrigeration circuit in balance at outdoor temperatures 
as low as -5˚C.
Please consult your local Mitsubishi Electric Sales
office for application advice on these parts.

The PEH models are designed to provide effective
heating even when the outside temperature is down 
to -10˚C.

All models are flexible mechanical control configulation.
In addition Global Remote Controller is prepared 
on standard.
The Global Remote Controller give the below function.
  • Cool/Heat/Fan/Auto Changeover
     3 pattern select (Change to switch inside R/C)
     · Cool/Fan
     · Cool/Heat/Fan
     · Cool/Heat/Fan/Auto Changeover
        (Heat and Auto Change over one only PEH)
  • 2 step control (PE(H)-15, 20 only)
  • Compressor Anti-short cycle timer (3 min)
  • Programmable weekly timer
     ON/OFF time setteing on 7-days
  • Real time clock
  • Built in Return air temperature Sensor
     (Option : Outside sensor)
  • Power failure comeback 
  • Error indicator
     · Room temperature sensor Error
  • Key Lock
     Key lock except ON/OFF key

Mitsubishi Electric air conditioners series PE(H)/PU(H)
are available in a wide range of sizes and models to
enables the designer to select the best model for
each application.
All series units are completely assembled, wired and 
strictly tested at the factory.

With the development of all series demands

for such features as light weight, compactness,
increased capacity, appropriate static pressure, air
flow control, and having flexibility of inter facing
energy saving electronic controls, Mitsubishi
Electric have met market expectations.

Grobal Remote Controller