Haier AS12QS2ERA 用户手册
English
2
Operation
Loading of the battery
Clock set
Load the batteries as illustrated. 2 R-03 batteries,
resetting key (cylinder); Be sure that the loading is
in line with the “+”/“-”;
resetting key (cylinder); Be sure that the loading is
in line with the “+”/“-”;
Load the battery, then put on the cover again.
Press CLOCK button,
Press “+” or “-” to set
correct time.
correct time.
Each press will increase or
decrease 1min. If the button is
kept pressed, time will change
quickly.
decrease 1min. If the button is
kept pressed, time will change
quickly.
press CONFIRM, “AM” and
starts working.
Note:
The distance between the signal transmission head and
the receiver hole should be within 7m without any obstacle
the receiver hole should be within 7m without any obstacle
change-over wireless telephone is installed in the type
in receiving the signals, so the distance to the indoor unit
should be shorter.
Full display or unclear display during operation indicates the
batteries have been used up. Please change batteries.
If the remote controller can’t run normally during operation,
please remove the batteries and reload several minutes later.
should be shorter.
Full display or unclear display during operation indicates the
batteries have been used up. Please change batteries.
If the remote controller can’t run normally during operation,
please remove the batteries and reload several minutes later.
Inner side of the controller
CHILD
LOCK
LOCK
SLEEP
SMART
FAN
COOL
SMART
HEAT
DRY
CTD
CTD
SET TEMP. ROOM TEMP.
AUTO
AUTO
AUTO
FAN
SPEED
POWER
SOFT
iFP
ECO
TIMER ON OFF
PM
AM
19
20
21
22
23
24
25
27
28
30
31
18
26
FRESH
LIGHT
10
QUIET
29
32
33
18. CODE button
Used to select CODE A or B
with a press, A or B will be
displayed on LCD. Please
select A without special
explanation.
with a press, A or B will be
displayed on LCD. Please
select A without special
explanation.
19. RESET button
When the remote controller
appears abnormal, use
a sharp pointed article to
press this button to reset
the controller normal.
appears abnormal, use
a sharp pointed article to
press this button to reset
the controller normal.
20. INQUIRE button
Inquire the external
environmental temperature
and the operating power
of the machine. (e.g. when
environmental temperature
and the operating power
of the machine. (e.g. when
the panel display “01”, the
operating power is 100W;
when the panel display
“02”, the operating power
is 200W, and so forth)
operating power is 100W;
when the panel display
“02”, the operating power
is 200W, and so forth)
21. POWER button
22. LIGHT button
Control the lightening and
extinguishing of the indoor
LED display board.
extinguishing of the indoor
LED display board.
23. HEALTH AIRFLOW button
24. HEALTH button
25. SMART button
Used to set SMART
operation. (This function
is unavailable on some
models.)
operation. (This function
is unavailable on some
models.)
26. SLEEP button
27. 10 ºC button
special heating set
function: 10 degree
heating maintaining
(valuable for RS)
function: 10 degree
heating maintaining
(valuable for RS)
28. CHILDLOCK button
If pressed, the other
buttons will be disabled.
Press it once again, lock
will be cancelled.
buttons will be disabled.
Press it once again, lock
will be cancelled.
29. FRESH button
30. TIMER ON / OFF button
31. HOUR button
used to change clock or
timer
timer
32. CANCEL/CONFIRM
button
clock settings.
33. CLOCK button
The following functions and related displays are not
available:
available:
20
Remove the battery cover;
1
2
3
1
2
3
PM
AM
QUIET
SMART
SLEEP
10
LIGHT
CHILD
LOCK
LOCK
FRESH
Hint:
Remove the batteries in case unit won’t be in usage for
a long period. If there are any display after taking-out,
just need to press reset key.
a long period. If there are any display after taking-out,
just need to press reset key.