Haier ESA410M 用户手册

下载
页码 80
ENGLISH
FILTER RESET
This feature automatically notifies you that the air filter must be cleaned. The indicator light will 
come on after 240 hours of operation. Clean the air filter (refer to Care and Cleaning), place it back 
in the front panel, and press the Filter Reset button. The light will turn off.
NOTE: The raised dots are Braille for the visually impaired. (See Fig.23)
Remote control may differ in appearance from the image shown.
NOTE:  Remove and discard protective film prior to use. The remote control runs 
on one CR2025 battery (included). Replace battery after 6 months of use, 
or when the remote control starts to lose power. To change battery, first 
remove screw on back panel of remote.
POWER
Press ON/OFF to turn on the air conditioner.
Mode
Press MODE to choose Fan, Cool, Energy Save or Dehum.
Speed
Press SPEED to choose High, Med, Low or Auto Cool.
TIMER
To set the air conditioner to turn off after a set amount between 1 hour and 24 hours (unit must 
be ON):
1.  Press TIMER. Timer OFF indicator light on the air conditioner control panel will flash.
2.  Press the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24 
hours.
3.  After 5 seconds, Timer OFF indicator light on the air conditioner control panel will remain on.
TO SET TIMER TO TURN ON THE AIR CONDITIONER, KEEPING PREVIOUS SETTINGS:
1. Turn on the air conditioner.
2.  Press TIMER. Timer On indicator light on the air conditioner control panel will flash
3.  Press the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24 
hours.
4.  After 5 seconds, Timer On indicator light on the air conditioner control panel will remain on.
PAGE 18 
USING YOUR AIR CONDITIONER
STARTING THE AIR CONDITIONER cont.
ON/OFF
MODE
SPEED
TIMER
TEMP/TIME
TEMP/TIME
USING THE REMOTE CONTROL
Fig. 23