Haier ESA415M 用户手册

1. Measure the width of the window opening. (See Fig.21)
2.  Mark the center line on the inside of the windowsill  

with a pencil. (See Fig.22)

FOR MODEL ESA424K (See Fig.23)
1.  Center the cabinet in the windowsill.  Make sure to place the unit so that it is resting on the 

windowsill with a ¼" to ½" downward tilt towards the outside. Lower the window sash behind 
the front flange of the top channel to hold the unit in place.  The bottom channel must rest 
behind the window sill. (See Fig.23)

NOTE: The appearance of your model may differ from the one shown.

NOTES AND WARNINGS:
• Be sure your air conditioner does not fall out of the opening during installation or removal.
•  A grounded electrical outlet within 4 ft. (122 cm) of where the power supply cord exits the air 

conditioner.

• Do not block the air discharge or air intake areas on the front panel.
• Do not block the louvers on the outside of the air conditioner.

WIDTH

LENGTH

HEIGHT

WIDTH

WIDTH

CENTER

WIDTH OF  
WINDOW OPENING

CENTER LINE

Fig. 21

Fig. 22

Fig. 23

Bottom Channel

Window Sill