Haier ESA418M 用户手册

•  Remove packaging materials. Save the carton and the foam packaging for storing the unit when 

not in use. 

NOTE:  There are NO internal packing materials to remove—Do Not open the cabinet. 

•  Handle the air conditioner gently.
•  Keep the air conditioner upright and level. Do not set the air conditioner on its side, front, back 

or upside down.

•   The air conditioner must be standing upright for 2 hours prior to installation and operation. 

Unpack unit in the floor near the installation location
1.  Remove the two front attachment screws (A).  Keep these screws for later use.  Separate the 

cabinet from the front panel. (See Fig.5)

2.  Remove the two screws per side (B) found at the bottom of the outer cabinet. Using the 

basepan handle, slowly and evenly pull out the chassis from the cabinet.  Use two or more 
people to move the air conditioner. 

CAUTION:  Never expose plastic front or  

grille to extreme temperatures.

When moving or lifting the air conditioner, use two or more people.  

Wear gloves when handling the air conditioner to protect against  

possible sharp edges and metal fins.

Fig. 5

A

B

B

B