Haier ESA405K 用户手册

NOTE: Your air conditioner’s device may differ from the one
shown.

This room air conditioner is equipped with a power supply cord
required by UL. This power supply cord contains state-of-the-art
electronics that sense current leakage. If the cord is crushed, the
electronics detect current leakage and power will be
disconnected in a fraction of a second.

ʄ

   Remove and dispose of/recycle packaging materials. Remove tape 

and glue residue from surfaces before turning on the air 
conditioner. Rub a small amount of liquid dish soap over the 
DGKHVLYHZLWK\RXU¿QJHUV:LSHZLWKZDUPZDWHUDQGGU\

ʄ

'RQRWXVHVKDUSLQVWUXPHQWVUXEELQJDOFRKROÀDPPDEOH

ÀXLGVRUDEUDVLYHFOHDQHUVWRUHPRYHWDSHRUJOXH7KHVH
     products can damage the surface of your air conditioner.

ʄ

   Handle the air conditioner gently.

1. Place the top channel on the top of the air conditioner, lining up 

the holes in the top channel with the holes in the top of the air 
conditioner.

2. Using three 

13⁄32” screws, attach the top channel to the air 

conditioner.

A

B

1.   Plug power supply cord into a grounded 3 prong outlet.

2.   Press RESET (on some devices, a green light will turn on).

3.   Press TEST (listen for click; Reset button will trip, and on
      some devices, a green light will turn off).

4.   Press and release RESET (listen for click; Reset button will
      latch, and on some devices, a green light will turn on). The
      power supply cord is ready for operation.

   The Reset button must be pushed in for proper operation.

The power supply cord must be replaced if it fails to trip when

     the test button is pressed or fails to reset.

   Do not use the power supply cord as an off/on switch.

   A damaged power supply cord must be replaced with a new

     power supply cord obtained from the product manufacturer
     and must not be repaired.

   The power supply cord contains no user serviceable parts.

     Opening the tamper-resistant case voids all warranty and
     performance claims.