Haier HWR06XCJ 用户手册

IMPORTANT: Observe all governing codes and ordinances.
Check the location where the air conditioner will be installed.

Make sure you have everything necessary for correct installation.

The location should provide:

■

   Grounded electrical outlet within 6 ft (183 cm) of where the

     power cord exits the air conditioner.
     

NOTE: Do not use an extension cord.

■

  Free movement of air in room to be cooled.

■

  A large enough opening for the air conditioner. Installation

     parts are supplied for double-hung windows.

■

  Adequate wall support for weight of air conditioner. Air

     conditioner weighs 42 lbs to 46 lbs (19 kg to 20.9 kg).
NOTE: Cabinet louvers must not be obstructed. Air must be able

to pass freely through the cabinet louvers.

The electrical ratings for your air conditioner are listed on the

model and serial number label. The model and serial number

label is located either on the side or back of the air conditioner

cabinet or behind the front grille.
Specific electrical requirements are listed in the chart below.

Follow the requirements for the type of plug on the power supply

cord.

This air conditioner must be grounded. This air conditioner is

equipped with a power supply cord having a 3 prong grounding

plug. The cord must be plugged into a mating, grounded 3 prong

outlet, grounded in accordance with all local codes and

ordinances. If a mating outlet is not available, it is the customer’s

responsibility to have a properly grounded 3 prong outlet installed

by a qualified electrical installer.

It is the customer’s responsibility:

■

   To contact a qualified electrical installer.

■

   115-volt (103.5 min. to 126.5 max.)

■

   0 to 12 amps

■

   15-amp time-delay fuse or circuit 

     breaker

■

   Use on single outlet circuit only.

A

B

Window opening measurements:

■

  22” minimum to 36” (55.9 cm to 91.4 cm) maximum opening 

    width.

■

 13³⁄8” (34 cm) minimum opening height.