Panasonic CW-XC54HU 用户手册
7
About
the
Controls
Controls
on
the
Air
Air
Conditioner
Remote controller
Precaution:
The Remote Controller will not function properly if strong light strikes the sensor window of the air
conditioner or if there are obstacles between the Remote Controller and the air conditioner.
1.
Remove the cover from the back of the remote
controller
controller
2.
Insert two batteries.
• Be sure that the (+) and (-) directions are correct.
• Be sure that both batteries are new.
• Be sure that both batteries are new.
3.
Re-attach the cover.
• Do not use rechargeable
batteries. Such batteries
differ from standard dry
cells in shape, dimensions,
and performance.
differ from standard dry
cells in shape, dimensions,
and performance.
• Remove the batteries from
the remote controller if the
air conditioner is not going
to be used for an extended
length of time.
air conditioner is not going
to be used for an extended
length of time.
How to Insert Batteries
OPERATION
TEMP
TIMER
MODE
ECONOMY
FAN SPEED
ROOM TEMPERATURE SETTING BUTTON
ECONOMY
ON/OFF TIMER BUTTON
OPERATION BUTTON
FAN SPEED SELECTION BUTTON
OPERATION MODE SELECTION BUTTON
• To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.
• This button takes priority over any other buttons.
• When you first turn it on, the air conditioner is on the High cool mode and the temp. at 72
• This button takes priority over any other buttons.
• When you first turn it on, the air conditioner is on the High cool mode and the temp. at 72
°F (22°C).
• Every time you push this button, it will toggle between COOL, FAN and DRY.
(Model:CW-XC54HK)
• Every time you push this button,it will toggle between COOL, ECONOMY, FAN
(Model:CW-XC54HK)
• Every time you push this button,it will toggle between COOL, ECONOMY, FAN
and DRY. (Model:CW-XC54HU)
• If you push this button, the fan stops when the compressor stops cooling. Approximately every
3 minutes the fan will turn on and check the room air to determine if cooling is needed.
• You can set the time when the unit will turn on or turn off automatically by pressing the timer
button. If the unit is in operation, this button controls the time it will be turned off. If the unit is
in off state, this button controls the time it will start. Every time you push this button, the
remaining time will be set as follows:
in off state, this button controls the time it will start. Every time you push this button, the
remaining time will be set as follows:
- STOPPING OPERATION
• Every time you push this button, when the air conditioner is operating, timer is set as
• Every time you push this button, when the air conditioner is operating, timer is set as
follows : (1Hour
→
2Hours
→
3Hours
→
4Hours
→
5Hours
→
6Hours
→
7Hours
→
8Hours
→
9Hours
→
10Hours
→
11Hours
→
12Hours
→
0Hour
→
1Hour
→
2Hours
→
...)
• The Setting Temperature will be raised by 2
°F (1°C) 30 min. later and by 2°F (1°C) after
another 30 min.
- STARTING OPERATION
• Every time you push this button, when the air conditioner is not operating, timer is set as
• Every time you push this button, when the air conditioner is not operating, timer is set as
follows : (1Hour
→
2Hours
→
3Hours
→
4Hours
→
5Hours
→
6Hours
→
7Hours
→
8Hours
→
9Hours
→
10Hours
→
11Hours
→
12Hours
→
0Hour
→
1Hour
→
2Hours
→
...)
Every time you push this button, it is set as follows.
{High(F2)
{High(F2)
→
Low(F1)
→
High(F2)...}.
This button can automatically control the temperature of the room. The temperature
can be set within a range of 60
can be set within a range of 60
°F to 86°F by 1°F. (16°C to 30°C by 1°C)
Select the lower number for lower temperature of the room.