Sanyo SAP-KRV94EHDX 用户手册

WARNING

7. INSTALLATION INSTRUCTIONS

7-1. Installation Site Selection

7-1-1. Indoor Unit

To prevent abnormal heat

generation and the possibility

of fire, do not place obstacles,

enclosures and grilles in front

of or surrounding the air

conditioner in a way that may

block air flow.

For stable operation of

the air conditioner, do not

install wall-mounted type

indoor units less than

1.5 m from floor level.

AVOID:

direct sunlight.

nearby heat sources that may affect performance of

the unit.

areas where leakage of flammable gas may be

expected.

places where large amounts of oil mist exist.

DO:

select an appropriate position from which every corner

of the room can be uniformly cooled. (High on a wall

is best.)

select a location that will hold the weight of the unit.

select a location where tubing and drain hose have

the shortest run to the outside.

allow room for operation and maintenance as well as

unrestricted air flow around the unit. (Fig. 1)

install the unit within the maximum elevation

difference (H) above or below the outdoor unit and

within a total tubing length (L) from the outdoor unit as

detailed in Table 1 and Fig. 2.

Install the indoor unit more than 1 meter away from

any antenna or power lines or connecting wires used

for television, radio, telephone, security system, or

intercom. Electrical noise from any of these sources

may affect operation.

Table 1

Model

KRV94 / 124

* If total tubing length becomes 7.5 to 15 m, charge additional refrigerant (R410A) by 15 g/m.
No additional charge of compressor oil is necessary.

Max. Allowable Tubing

Length at Shipment

(m)

7.5

Limit of Tubing

Length (L)

(m)

Limit of Elevation

Difference (H)

(m)

Required Amount of

Additional Refrigerant

(g/m)*

5 cm

min.

5 cm
min.

15 cm min.

Front View

INDOOR
UNIT

Tubing length (L)

OUTDOOR
UNIT

Elevation
difference (H)

CAUTION

Indoor unit

Floor level

Wall

Minimum height
from floor level

1.5 m

Fig. 1

Fig. 2

Fig. 3