Toshiba CEILING TYPE 用户手册

– 69 –

Turn on power of the air conditioner.

The operation is not accepted for 5 minutes when power has been turned on at first time after installation,

and 1 minute when power has been turned on at the next time and after. After the specified time has

passed, perform a test operation.

Push [Start/Stop] button and change the operation mode to [COOL] or [HEAT] with [Mode] button.
Then change the fan speed to [High] using [Fan] button.

Set temperature to [18°C] using [Temperature set]

Set temperature to [30°C] using [Temperature set]

button.

button.

After checking the receiving sound “Pi”, immediately

After checking the receiving sound “Pi”, immediately

push [Temperature set] button to set to [19°C]

push [Temperature set] button to set to [29°C].

After checking the receiving sound “Pi”, immediately

After checking the receiving sound “Pi”, immediately

push [Temperature set] button to set to [18°C].

push [Temperature set] button to set to [30°C].

Then repeat the procedure 

 → 

 → 

 → 

 .

After approx. 10 seconds, all the display lamps on the sensor part of wireless remote controller,

[Operation] (Green), [Timer] (Green), and [Ready] (Yellow) flash and the air conditioner starts operation.
If the lamps do not flash, repeat the procedure 

  and after.

After the test operation, push [Start/Stop] button to stop the operation.

Be sure to set the 
air speed to [High]

Test cooling operation:

Start → 18°C → 19°C → 18°C → 19°C → 18°C → 19°C → 18°C → (Test operation) → Stop

Test heating operation:

Start → 30°C → 29°C → 30°C → 29°C → 30°C → 29°C → 30°C → (Test operation) → Stop