Toshiba RAS-07PKVP-E 用户手册

下载
页码 32
27
EN
Before asking for servicing or repairs, check the following points.
TROUBLESHOOTING (Remote Controller)
The remote controller does not operate correctly.
Symptoms
Causes
Possible Solution
The operating mode switches.
• Check whether the MODE indicated 
on the display is AUTO.
The fan speed and louver direction 
cannot be changed in AUTO mode.
When the SWING, FIX or FAN buttons 
are pressed in AUTO mode, the mode 
changes to A mode.
The fan speed cannot be 
changed.
• Check whether the MODE indicated 
on the display is 
: DRY.
When dry operation is selected, the air 
conditioner automatically selects the 
fan speed. The fan speed can be 
selected during 
 COOL and 
HEAT.
The Display Goes Off
Symptoms
Causes
Description
The indicators on the display 
are not shown after a short 
time.
• Check whether the timer operation is 
over when the OFF TIMER is shown 
on the display.
The air conditioner stops since the 
setting time has elapsed.
The TIMER display turns off 
after a certain period of time.
• Check whether the timer operation 
has started when the ON TIMER is 
shown on the display.
When the time reaches the time 
setting for the ON timer operation, the 
air conditioner starts to operate 
automatically and the ON timer display 
turns off.
The Signal Receiving Tone Does Not Sound
Symptoms
Causes
Description
No receiving tone is made from 
the indoor unit even when the 
 button is pushed.
• Check whether the infrared signal 
transmitter of the remote controller is 
properly pointed towards the receiver 
of the indoor unit when the 
 button 
is pushed.
Point the infrared signal transmitter of 
the remote controller towards the 
receiver of the indoor unit, and then 
press the 
 button repeatedly.
AUTO
: DRY
: ON