Raypak 0133-4001 用户手册
11
OUTDOOR INSTALLATIONS
Step 2: Tighten the (4) screws (Shown below) until
they come in contact with the unit jacket top,
then evenly tighten all (4) screws to secure
to unit.
then evenly tighten all (4) screws to secure
to unit.
MODELS 926-1758
Heaters are shipped with outdoor vent terminal
factory installed.
MODELS 2100-4001
These units are not certified for outdoor installa-
tion.
VENTING
Fig# 8166
Fig# 8233
MODELS 514-824
Step 1: Lower outdoor "Stackless" top onto unit.
Position top so it is centered on unit from
side-to-side and front-to-rear.
side-to-side and front-to-rear.
MODELS 181-401 and 182-400
VENT TERMINAL (Outdoor) Stackless Top Installa-
tion
tion
1.
Insert tabs into
keyhole (4 places).
Fig. #RP8280.1
MODEL 133
Step 1: Remove the front (4) screws.
Step 2: Line up outdoor top vent opening over heater
Step 2: Line up outdoor top vent opening over heater
vent opening.
Step 3: Lower outdoor top onto unit lining up slots in
the outdoor top with screws holes in jacket top.
Step 4: Reinstall (5) screws to secure jacket top and
outdoor top to unit.
Fig. #8114
2.
Snap tabs into keyholes
so as not to pull out.
Pagoda Top (Shipped Loose with Heater)
Fig# 8278.1