Quadra-Fire 31ST-ACC 用户手册

March 2, 2007

7033-277C

Page  15

R

Do not remove. 

1. Remove the 3 bolts (1/4”-20 Phillips head) on the outer 

skin at the bottom rear of appliance.

2.  Align holes in mounting fl ange of blower with bolt holes in 

appliance. Blower should be positioned at bottom of rear 
outer skin as shown in Figure 15.1.

3. Re-insert and tighten bolts, securing blower onto outer 

wall of appliance.

4. Place the bracket containing the snap disc and magnet 

under the bottom left rear corner as shown in Figure 15.1. 

 See 

page 29 for detailed operating instructions for the 

blower and snap disc.

Shock Risk.
•  Do NOT remove grounding prong from plug.

•  Plug directly into properly grounded 3 prong 

receptacle.

•  Route cord away from appliance.

•  Do NOT route cord under or in front of appliance.

 

MANUAL: Over-rides the 
Snap Disc 

AUTO:  Fan will turn ON/OFF 
Automatically by the Snap Disc 

Controls the Fan Speed 

Snap Disc 
Bracket  
with Magnet 

MANUAL 

FAN 

AUTO 

LOW 

HIGH 

OFF 

Secure wires 
with wire tie.