Yeoman PM302 产品宣传页

PM340 - Issue 1 (December 2009)

 • Yeoman Boiler Stove - PM302

The following addition has been designed to compliment

the above manual. This addition should be located after:

 

•  Section 7: Ash Removal, User Section 

1.1  In order to burn wood continuously in this appliance a

Wood Burning Tray should be fitted, Diagram 1

2.2  Remove the Multi-fuel Grate from the appliance see Page

23, Section 4

2.3  To fit the Wood Tray:

• Remove the Log Bar and Ashlip

• Hold the tray flat with the front edge (indicated by the

supports - Diagram 3) pointing forwards

• Tip diagonally and insert through the front of the stove,

Diagram 2

• Place flat on the fixings on the bottom of the appliance,

Diagram 3

 • Fit the plug supplied in the right hand side where the

riddling mechanism is located, Diagram 4

PR8454

Plug

Clamp

Bolt

• Replace the Log Bar and the Ashlip