England's Stove Works 25-PI 用户手册

 

Every time before pressing “ON” to start your 
unit – Be sure to remove all ashes (burnt or 
partially burnt) from your burn pot area! 

 

Wearing protective gloves and with the unit 
cool, remove the Wear Plate and dump the 
ashes, ensuring that the air holes are clear 
from debris.  Also be sure to follow all other 
maintenance instructions as outlined in your 
Owner’s Manual and the Instructional DVD 
included with the unit.  Failure to remove 
ashes from this area before each burn can 
cause smoke-back and serious damage to 
your stove, and can void your warranty.  We 
will not be held responsible for poorly 
maintained units, including excess ash in the 
burn pot area. 
Burn Safe and Burn Clean –  
Clean the burn pot area daily!   

 

 

Some homes, including the modern, air-tight homes that are well-insulated, create a negative draft that 
could cause smoke to be released from your unit, especially if it is too close to your home’s Central 
Furnace.  If you install your stove in the same room as the Cold Air Return from your home’s Central 
Furnace, you must place your stove at least 20 feet (20’) from the Cold Air Return.  We recommend you 
open an outside window slightly, and never close the door that leads from this room to the rest of your 
home.  
 

 

If you see smoke coming out of your unit into the room due to a power failure,  
DO NOT OPEN THE HOPPER OR DOOR TO YOUR UNIT!!  Remain calm.   

Open the nearest outside door and windows and wait for all signs of smoke to clear (at least one 

hour, although the smoke should dissipate quickly once the door and windows are opened).  When 
power is restored, press the ON button to restart your unit, and let the unit run for at least 30 
minutes.   
-- If you see any further signs of smoke-back, press the OFF button and call Technical Support at 
(800) 245-6489 before restarting your unit, as damage could have occurred due to the power failure. 
-- If you see no more signs of smoke-back, press the OFF button and wait for your unit to completely 
shut down and cool down, then clean the burn pot area before restarting your unit (see “Before 
Starting Your Unit,” above). 

If you see smoke coming out of your unit into the room and the power has not failed,  
DO NOT OPEN THE HOPPER OR DOOR TO YOUR UNIT!!  Remain calm.   

Immediately press the OFF button, open the nearest outside door and windows and wait for all 

signs of smoke to clear (at least one hour, although the smoke should dissipate quickly once the 
door and windows are opened).  Do NOT restart your unit before calling Technical Support at (800) 
245-6489. 

 

 

3