Insignia NS-3IN1MT50C-C 用户手册
8
3-in-1 TV STAND
www.insigniaproducts.com
Step 2
: Align and attach the upper and middle crossbars (E and G) and the bottom brace (I) to
the side frames (A and B)
1 Insert two 1 5/8” bolts (V) through the lock washers (X) and flat washers (Y) through the drilled holes on the top
rail of the side frames (A and B) and securely screw into the threaded holes of the top crossbar (E).
2 Repeat the same procedure to attach the middle crossbar (G) to the middle rail of the side frames (A and B).
3 Insert two 2¼” bolts (W) through the lock washers (X) and flat washers (Y) through the drilled holes on the
bottom rail of the side frames (A and B) and securely screw into the threaded holes of the bottom brace (I).
UP
You’ll need:
V (4)
W (2)
X (6)
Y (6)
EE (1)
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 8 Wednesday, May 7, 2014 1:33 PM