InSinkErator C1300 用户手册

Property Damage: Do not pinch or break copper

tubing. Do not distort the last 1 inch of tubing.

■

■

From under the sink, place the 
semi-circular mounting plate onto
the threaded stud.

■

■

Place hex nut onto the threaded stud.
Ensure faucet head is at desired angle. 

■

■

Insert screwdriver into hole on side of
hex tool (creating a “T”), and use tool
to tighten nut and secure faucet.

2

■

■

Ensure that the black O-ring is
properly seated in the base of the
dispenser head (the groove on the
underside of the dispenser).

■

■

Feed tubes down through the hole 
in the sink or countertop until the
base is at rest on the sink or
countertop surface.

■

■

Unpack dispenser components. 

■

■

On a firm, flat surface, carefully
straighten the copper tubing.

B

A

C

D

INSTALLING THE FAUCET - C1300

4