Lightolier 4531 产品宣传页

LIGHTOLIER a GENLYTE company.

631 Airport Road, Fall River, MA 02720

(508) 679-8131 • FAX (508) 647-4710

 © 1995

7. Position Backplate over Crossbar allowing Crossbar Mounting

Screws to come through Holes in Backplate.  Secure Backplate

in position by installing (2) Battery Nuts over Crossbar Mounting

Screws and tighten.

8. If using Auxiliary Mounting Knockout, install the appropriate

hardware determined in step 3.

9. Position Screw through Loop in Safety Cable and thread Screw

into Mounting Boss on inside of Lens Assembly (Fig. 2).

10. Install recommended lamp(s).
11. Position Lens Assembly over Backplate making certain the

Safety Cable does not interfere with the Gasket (fig. 1).

12. Secure Lens Assembly in place by tightening the (2) Mounting

Screws on the face of Lens Assembly.

CAUTION: Maximum wattage as marked on fixture must not

be exceeded.

WARNING—(Risk of Fire) most dwellings built before 1985

have supply wire rated for 60° C.  Consult a qualified

electrician before installing.

CAUTION: For wet locations, in accordance with

Underwriters Laboratories requirements, a line of caulking

compound such as acrylic latex or silicone must be placed

around the perimeter of Backplate to seal water away from

the outlet box and back openings.

IS:4531

0995

Page 2 of 2

FIG. 2

Inside Lens Assembly

Instructions for Installation of Arco™

 

4531, 4532, 4533,

4551, and 4552 Series Fixtures.

Glass

Mounting Boss

Loop

Mounting Screw

Safety Cable