Lightolier 1088WH 产品宣传页

 

1. 

FRAME-IN KIT INSTALLATION: See frame-in kit instruction sheet for installation procedure. 

2.     ATTACH SOCKET CUP TO TRIM: 
2a.  Socket cup is attached to trims by use of socket cup 
spring channels on inside of eyeball.  

2c.  Squeeze socket cup spring legs together and insert the 
second leg into the channel on the opposite side of eyeball. 

 

 

2b.  Align one socket cup spring leg with the channel on 
one side of eyeball. 

2d.   Push socket cup into eyeball until both socket cup spring 
legs hit the tab at the base of the channel.

 

 

NOTE: Spring tension should draw socket cup into position. 
 

 

 

 

3.    PUSH UP: 
 

 
Pre-aim and push trim straight up into fixture housing until it is tight against the ceiling. 
 
 
Aiming may be adjusted as necessary.  For rotational adjustment remove trim from fixture 
housing and reposition to achieve the desired aiming. 

 

This fixture is intended for installation in accordance with the National Electrical Code and local regulations.  To 

assure full compliance with local codes and regulations, check with your local electrical inspector before 

installation.  To prevent electric shock, turn off electricity at fuse box before proceeding. 

INSTALLATION PROCEDURE FOR: 1088, 1088WH, 1088GW 

 COMPANY