Lightolier IS:SL003H 产品宣传页

INSTRUCTION SHEET

INSTRUCTION SHEET

INSTRUCTION SHEET

INSTRUCTION SHEET

INSTRUCTION SHEET

09-04/Rev-01

A. PREPARATION:
1. Remove the cover from the channel.

2. For flush units No.SL110A and spaced units No.SL110B:

Remove the lampholder housing from the channel.
(See instruction Sheet No.ISSL110A)

1. Insert a threaded connector into the opening of the

channels. (Fig.1)

2. Fasten with the set screw. (Fig.1)

3. Push  leads through the connector.
4. Align the other channel and secure.

1. Push the leads  through the block, according to desired

configuration. (Fig.2a)

2. Slide  connector on leads  and screw half the distance

in  blocks. (Fig.2b)

3. Secure  connectors in the channels. (Fig.3)

C. CONNECTING INTO THE CHANNEL:
1. Connect the green or stripped (ground) lead together.

(Fig.4)

2. Connect the white leads together. (Fig.4)
3. Connect the black lead(s) to the blue/white lead. (Fig.4)
4. Reposotion the wire holder as necessary. (Fig.5)
5. Reinstall the cover on the channel.

D. CEILING or WALL:
Follow the installation instructions on the appropriate instruc-
tion sheet. (See series No.ISSL003A, B or C)

E. STEM or CABLE:
Note: The stem or cable can be installed directly onto the
block. (Fig.6)
Follow the installation instructions on the appropriate
instruction sheet. (See series No. ISSL003D or E)

F. CONNECTION to the JUNCTION BOX:
Follow the installation instructions on the appropriate
instruction sheet. (See series.No.ISSL003)

ALLEN
KEY

SET

SCREW

THREADED
CONNECTOR

CHANNEL

CONNECTOR

BLOCK

LEAD

THREADED
CONNECTOR

SET
SCREW

ALLEN

KEY

CHANNELS

STEM

CABLE

BLOCK

BLOCK

HOUSING

LEADS

CHANNEL

WIRES
HOLDER

BLOCK