Lightolier 604MR 产品宣传页

a Genlyte company 

www.lightolier.com

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • D0406

Lytecaster Recessed Downlighting 

Page 1 of 1   Recessed Linear Low Voltage 4 x MR16     Ceiling Opening: 5 3/8" (137mm) x 22 1/4" (567mm)

7 3/8"

6 3/4"

MAX: 42 1/2"

MIN: 40 1/2"

22"

2"

6 3/4"

24 7/16"

1.  Housing / Plate:  Die-formed 20 ga. steel ; Black painted finish. 

Accommodates all ceilings up to 2” (51mm) thick. Adjustable from inside. 
Concealed wiring channel.

2.   Face Plate: Die-formed 20 ga. steel; White painted finish. Inner
   Mounting ring welded to plate to accept 400 series trims. 1/4”  

(7mm)  lip all around.

3.  Torsiontite Springs: For easy installation of faceplate. Insures that 

faceplate edges are snug to ceiling.

4.   Junction Box: 14 ga. steel, 5” (127mm) x 3-1/2” (89mm) x 1 1/2” (38mm)
  deep box, allows inspection from below. CSA, US certified for through branch 

circuit wiring with maximum of 8 (#12ga.), 90º C conductors.

5.  Transformer: Magnetic 150VA (Class “B”) and 75VA (Class “H”), 

120/277/347 volt primary, nominal 12 volt secondary.

6.  Thermal Protector: Meets CSA/UL requirements. Insulation, if used,
  must be kept 3” away from luminaire sides and junction box. Do not cover  

top of luminaire.

7.   Socket: Porcelain body; Two-pin (GX5.3 base) Pre-wired with 18 ga.
  Teflon 250º leads to junction box. 

CSA,US ; Certified for damp locations.

1950 - 18" Mounting Bar
1951- 31" Mounting Bar 
FA10251-WH - Replacement Spacer Ring 

Magnetic transformers may produce audible sound which may be
objectionable in acoustically critical areas. The use of dimmers can further
amplify the sound levels. 

Alzak Cones
Painted Baffles
Eyeball 
Pinhole
Gimbal 
Elbow

4 x 75W MR16
4 x 75W MR16
4 x 75W MR16
4 x 65W MR16
4 x 75W MR16
4 x 75W MR16

Frame-In Kit

Face Plate