Videocon VU324LD 用户手册
2. Initial Setup
Before Starting
Please read the warnings and safety precautions
Section starting on page 27 before using your TV.
Section starting on page 27 before using your TV.
Please note the following important points!
1.
1.
Two people should lift or carry the TV!
2.
Ensure you have plenty of space to work in safely!
3.
A screw driver is required to fit the stand!*
4.
When fitting the stand ensure that the area you lay the TV face down on, is flat, stable and cushioned to prevent
damage to the screen!*
damage to the screen!*
5.
Carefully remove the TV and accessories from the box supplied in – retain this and any packaging for 60 days
before disposing of.
before disposing of.
In the Box/ Standard Accessories
1 x LCD Television
2 x AAA Batteries (Remote)
1 x Mains Cable
4 x Stand Mount Screws (2 x BLACK Screws, 2 x SILVER Screws) *
1 x Quick Start Guide
1 x Stand Mount *
1 x User’s Manual
1 x Remote Control
If any of the above items are missing please contact our service helpline on the number below!
Fitting the Stand Mount to the TV*
Remove the TV panel from the box and place face down on a flat,
cushioned surface (take care not to damage the screen)
cushioned surface (take care not to damage the screen)
1.
Remove the blocking plate from the bottom of the TV as
IMPORTANT NOTE
DO NOT PLUG YOUR TV INTO THE AC MAINS SOCKET UNTIL YOU
HAVE READ THIS CAREFULLY!
•DO NOT CONNECT THE TV TO THE MAINS or USE UNLESS EITHER
THE STAND IS FITTED or THE BLOCKING PLATE (SUPPLIED) IS
SCREWED SECURELY IN PLACE – SEE INSTRUCTIONS BELOW!!!!!
THE STAND IS FITTED or THE BLOCKING PLATE (SUPPLIED) IS
SCREWED SECURELY IN PLACE – SEE INSTRUCTIONS BELOW!!!!!
2
1.
Remove the blocking plate from the bottom of the TV as
shown in fig 1 (taped in position – retain for possible future
use – as this will require re-fitting if wall mounting).
shown in fig 1 (taped in position – retain for possible future
use – as this will require re-fitting if wall mounting).
2.
Insert the stand mount into the stand recess at the bottom
of the TV as shown, and carefully slide into position – fig 2.
of the TV as shown, and carefully slide into position – fig 2.
3.
Insert and tighten the four screws supplied in the following
sequence. Ensure you follow the steps below - fig 3 and 4.
1.
A – Bottom Left
(BLACK Screw)
2.
B – Top Left
(SILVER Screw)
3.
C – Top Right
(SILVER Screw)
4.
D – Bottom Right
(BLACK Screw)
4.
When the stand is secure carefully lift the TV upright and
position on a stable, flat surface for viewing.
position on a stable, flat surface for viewing.
•
To detach the stand, perform the above steps in reverse and
re-fit the blocking plate, using the 2 BLACK screws to secure in
position (fix through bottom screw holes A and D) – fig 3.
re-fit the blocking plate, using the 2 BLACK screws to secure in
position (fix through bottom screw holes A and D) – fig 3.
fig 5
Front
Back
Stand – Top View
Stand Column
Service Number 0845 293 7697
* Not applicable on 262LD model.
fig 1
fig 2
fig 3
fig 4
A
B
C
D