Lightolier C7E17OVM 产品宣传页

Job Information

Type:

Job Name:
Cat. No.:

Lamp(s):
Notes:

Vertical Adjustment: 
5/8" (16 mm) to 
2 7/8" (73 mm)

2" (50 mm) max.
Ceiling Thickness

7-3/8" (187 mm) Dia.

7-1/8" (181 mm) Dia.

8-5/8" (200 mm) Dia.

9-7/8" 

(251 mm)

Flangless Trim with 

Calculite

®

HID Downlight  

Page 1 of 2

7" Aperture, ED17 (Open Rated), Ceramic Metal Halide, Medium Beam

10-1/2" 

(267 mm)

10-7/8" 

(276 mm)

18-5/8" (473 mm)

8 1/4" 

(210 mm)

20" (508 mm) to 30" (762 mm)

9-3/4" 
(248 mm)

11" (280 mm)

(100/150W)

20" (508 mm) to 
30" (762 mm)

9-3/4" 
(248 mm)

10-7/8" 

(276 mm)

a Genlyte Thomas Company

www.lightolier.com

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504

1. Reflector: Clear anodized aluminum, 0.040" (16-ga.). Provides wide beam

distribution. Provides 50° visual cut-off to lamp and lamp image; 
self-flange in painted white or aperture-matching polished flange. Consult
factory for other finishes.

2. Multi-Groove Baffle: One piece seamless aluminum. Sharply detailed con-

centric rings, black finish. Permanently fastened to specular clear reflector.

3. Socket Housing: Galvanized steel, pre-wired with medium base pulse rated

socket. Snaps onto upper reflector for secure attachment without tools; uni-
tized construction assures proper lamp position for consistent performance.

4. Mounting Ring 0.048" (18-ga.) galvanized steel. Designed for vertical

adjustment from above or below. For ceilings from 0" to 2" thick. Center 
line notches allow consistent alignment of multiple fixtures.

5. Mounting Frame: 0.048" (18-ga.) Galvanized steel includes pre-installed

mounting bars.

6. Retention Springs: Rust resistant springs secure reflector in place for quick,

tool-less installation.

7. Frame Vertical Adjustment Mechanism: Vertical adjustment mechanism

accommodates mounting to virtually any ceiling system using pre-installed
mounting bars, or 1/2" EMT tubing (by others). Single locking feature secures
all adjustments. Alignment holes and markings allow fixture to be pre-set
prior to installation.

8. Mounting Bars: 0.048" (18-ga.) Pre-installed, telescoping bars extend to 

30" long; lock securely into position. Built-in locking tabs provide positive

attachment to common T-bar systems. Self-centering feature simplifies 
installation in 24" O.C. grid systems. Attaches to steel or wood joists 
without accessories.

9. Ballast: Electronic 120V or 277V. Magnetic dual voltage (120V & 277V).

Accessible from below for inspection and/or replacement without tools.

10. Junction Box: 0.048" (18-ga.) galvanized steel. UL listed for 8 No. 12 AWG,

90°C through branch circuit conductors; allows inspection from below.

11. Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not

install insulation above nor within 3" (76mm) of any part of the luminaire.

Electronic Ballast: 120V or 277V, 50/60 Hz., encased, high-power factor, T.H.D.
<15%, thermally and transient protected, RMI / RFI complies with FCC Part 18
non-consumer equipment, shut-down circuit at end of lamp life, sound rating "A",
-5°F minimum starting temperature, Type 1 outdoor rating.

70W MH

M98/M139

120/277

0.67/0.29 

78

100W MH M90/M140

120/277

0.90/0.43 

110

150W MH M102

120/277

1.40/0.61

167

Magnetic Ballast: 120/277V dual voltage, 60 Hz., encased and potted, 
HX-HPF circuit type, high power factor, sound rating "B", -20°F minimum starting 
temperature, Type 1 Outdoor rating.

70W MH

M98/M143

120/277

1.90/0.80

94

100W MH M90/M140

120/277

2.40/1.10

125

150W MH M102

120/277

3.70/1.60

180

Auxiliary: Add suffix A to Frame-In Kit and Reflector Trim. See Spec.Sheet ”A“.
Emergency Lamp: Add suffix E to Reflector Trim and Frame In Kit. See Spec.
Sheet “E”.
Slope Ceiling Adapters: See Specification Sheet SCA. 
Fuse: Add suffix F1 or F2 to Frame In Kit (F1=120V, F2=277V)
Chicago Plenum: Consult Factory.

UL (Suitable for Damp Locations), CSA, I.B.E.W. For 150W, install fixtures with
minimum spacing:  3 feet from center-to-center of adjacent luminaries; 3 inch
from top of luminaire to overhead building member;1 1/2 feet from luminaire
center to side building member.

Ceiling Cutout: 8” (203 mm) Dia. 

Specular Clear, White Painted Flange.

C770MHOE1 Electronic 120V / C770MHOE2 Electronic 277V

70W E17, ED17, BD17 (Open Rated)

Specular Clear, Matching Flange.

C710MHOE1 Electronic 120V / C710MHOE2 Electronic 277V

100W E17, ED17, BD17 (Open Rated)

Comfort Clear Diffuse, White Painted Flange. C715MHOE1 Electronic 120V / C715MHOE2 Electronic 277V

150W E17, ED17, BD17 (Open Rated)

Comfort Clear Diffuse, Matching Flange.

C770MHOU Magnetic 120V/277V

70W E17, ED17, BD17 (Open Rated)

Champagne Bronze, White Painted Flange.

C710MHOU Magnetic 120V/277V

100W E17, ED17, BD17 (Open Rated)

Champagne Bronze, Matching Flange.

C715MHOU Magnetic 120V/277V

150W E17, ED17, BD17 (Open Rated)

Black Multi-Groove, White Trim Ring