Cooper Lighting P1R 产品宣传页

Roundel

Warning

These installation instructions are valid with the above Ametrix styles.

Sheet 1 of 2

Visor and Non-Visor

that all sources of power are turned off. All

performed by a certified electrician.

: Before starting any work ensure

work must meet local/national codes and be

Do not

mount fixtures vertically.

Installation Instructions

Vault

C-Scroll

Small, OUTDOOR

P1R

(Pendant, 1-way, Remote ballast)

ADY071467 REV B(ECN80481)

with canopy.

(2x)

set screw

(2x)

set screw

#10-32 x3/8"

Secure canopy using both #10-32 x3/8" set screws.

To seal door, refer to torque sequence supplementry page.

1. After securing fixture to ceiling, attach appropriate wires

and ensure all connections are properly matched.

2. Push wire connections into j-box and cover mounting plate

#6-32 x1/2"

#6-32 x5/8"

set screw

Securing fixture to ceiling

indicator

(2x)

When fixture head is rotated to desired angle, retighten end

screws to secure the position.

#10-32 x5/8"

End screw

Fixture head

degrees

1. To aim fixture, loosen both #10-32 x5/8" end screws. When

both indicators are lined up, the slope of the lens face is 40-

degrees. Each subsequent notch is an additional +/- 10-

Yoke arm

indicator

(x4)

(2x)

Set screw

Use

J-box

Canopy

mounting plate.

Aiming the fixture

#8-32 x 3/8"

Using appropriate fasteners, secure fixture to ceiling.

(by others)

Run wires from pendant and j-box through wiring holes in

(by others)

4.
additional bracing around J-box to support fixture.

1. Using both #10-32 x5/8" end screws, secure fixture head to

yoke on pendant and run wire through compression fitting

and into pendant.

2. Remove both #10-32 x3/8" set screws and allow canopy to
slide down pendant.

1/4" fasteners

Use additional bracing
around J-box to support
fixture.

(by others)

1/4" fasteners

J-box

#8-32 x3/8"

Set screw

#6-32 x1/2"

Set screw

Canopy

(2x)

#6-32 x 5/8"

(by others)

End screw

Set screw

Exploded view and part call-out

Wiring & sealing the fixture

(2x)

#10-32 x5/8"

Compression

fitting