Cooper Lighting IMI-567 产品宣传页

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible
contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please
contact your nearest representative.

1.  Partially screw the (6) provided 8-32 SET SCREWS

into the threaded holes in the top and sides of the 
fixture door.

2.  Place the TOP VISOR into the groove in the fixture 

door.

3. Make sure the SET SCREWS and slots in the TOP 

VISOR are aligned then securely tighten the set 
screws.

4.  Check to make sure the SET SCREWS pass 

through the slots in the TOP VISOR and provide a 
secure attachment.

AVU033141

IMPORTANT: Read carefully before installing fixture. Retain for future reference.

General: Upon receipt of fixture thoroughly inspect for any
freight damage, which should be brought to the attention of
the delivery carrier. Compare the catalog description listed
on the packing slip with the fixture label on the housing to
assure you have received the correct merchandise.

Safety: This fixture must be wired in accordance with 
the national electrical code and applicable local codes 
and ordinance. Proper grounding is required to insure 
personal safety. Carefully observe grounding procedure
under installation section. All work should be done by a 
qualified electrician.

TM

1.  Partially screw the (8) provided 8-32 SET SCREWS

into the threaded holes in the top and sides of the 
fixture door.

2. Place the SHIELDS into the groove in the fixture 

door.

3. Make sure the SET SCREWS and slots in the 

SHIELDS are aligned then securely tighten the set 
screws.

4. Check to make sure the SET SCREWS pass 

through the slots in the SHIELDS and provide a 
secure attachment.