Cooper Lighting IMI-694 用户手册
FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR
DEATH
DEATH
NOTE : Use minimum 90°C supply wire rating for connections in J-box.
Fixture Orientation Guideline:
Proper orientation of luminaire may vary based upon design requirements
specified per given application. Labels are supplied on top of fixture and
mounting plate for reference to proper fixture alignment. Align quick mount
plate in correct direction by referencing number of fixtures required (double or
single row luminaire installation) to direction of arrows. Direction of arrow(s)
should be in line with direction of traffic.
Proper orientation of luminaire may vary based upon design requirements
specified per given application. Labels are supplied on top of fixture and
mounting plate for reference to proper fixture alignment. Align quick mount
plate in correct direction by referencing number of fixtures required (double or
single row luminaire installation) to direction of arrows. Direction of arrow(s)
should be in line with direction of traffic.
LUMINAIRE INSTALLATION:
1. Install quick mount plate on a 4” junction box as shown in (Figure 1).
1. Install quick mount plate on a 4” junction box as shown in (Figure 1).
Note the required position of plate to ensure correct light beam
orientation from fixture. See guidelines above or labels on top of fixture
housing and mounting plate if applicable.
orientation from fixture. See guidelines above or labels on top of fixture
housing and mounting plate if applicable.
2. Secure hanging hook into the rear hooks of quick mount plate
(Figure 2 & 3).
3. Make wiring connection while luminaire is being suspended from hanging
hook.
4. Push excess wires and connectors up into the junction box through center
access hole.
These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation,
operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.
NOTE: Specifications and dimensions subject to change without notice.
operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.
NOTE: Specifications and dimensions subject to change without notice.
EPL Envoy
Parking Luminaire
Sheet 1 of 5
8/20/08
IMI-694
INSTALLATION INSTRUCTIONS
IMPORTANT : READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN FOR FUTURE REFERENCE
GENERAL: Upon receipt of luminaire thoroughly inspect for any freight
damage, which should be brought to the attention of the delivery
carrier. Compare the catalog description listed on the packing slip
with the luminaire label on the housing to assure you have received the
correct merchandise.
SAFETY: This luminaire must be wired in accordance with the national
electrical code and applicable codes and ordinances. Proper grounding
is required to insure personal safety. Carefully observe grounding
procedure. All work should be done by a qualified electrician.
damage, which should be brought to the attention of the delivery
carrier. Compare the catalog description listed on the packing slip
with the luminaire label on the housing to assure you have received the
correct merchandise.
SAFETY: This luminaire must be wired in accordance with the national
electrical code and applicable codes and ordinances. Proper grounding
is required to insure personal safety. Carefully observe grounding
procedure. All work should be done by a qualified electrician.
WARNING: Make certain power is OFF before starting installation or
attempting any maintenance.
WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit
breaker before installing or servicing.
WARNING: Risk of Burn. Disconnect power and allow luminaire to cool
before changing lamp or handling luminaire.
WARNING: This luminaire is for use with downlight applications only.
WARNING: RISK OF FIRE! DO NOT mount on or near combustible
materials.
attempting any maintenance.
WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit
breaker before installing or servicing.
WARNING: Risk of Burn. Disconnect power and allow luminaire to cool
before changing lamp or handling luminaire.
WARNING: This luminaire is for use with downlight applications only.
WARNING: RISK OF FIRE! DO NOT mount on or near combustible
materials.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 ADH080771
Figure 3
Figure 1
Figure 2
CENTER ACCESS
HOLE
HOLE
#8-32 SCREW
QUICK MOUNT
PLATE
PLATE
J-BOX
J-BOX
HANGING
HOOK
HOOK
LUMINAIRE
LIFT UP
THEN PUSH
LUMINAIRE
BACK
LUMINAIRE
BACK
FRONT HOOKS
LUMINAIRE
HANGING HOOK
HANGING HOOK
REAR HOOKS
QUICK MOUNT
PLATE
PLATE
J-BOX